Can You Drag a Snowmobile

Most of the times you run into situations in which you ask yourself can you drag a snowmobile?

You can drag a snowmobile if the distance is very short but if it is long, make use of a dolly to avoid damage on the mechanical parts.

This can arise when you want to clean your garage where your snowmobile is stored.

Also it could occur if you want to load it on a truck or if your snowmobile spoils.

What you should pay more attention to is how to drag a snowmobile without causing damage to it.

This guide will show you the best way you can carry that out.

What Causes Dragging Of a Snowmobile

1) When You Want To Clean Your Garage

Most of the times, the best place to store your snowmobile after use is your garage.

This keeps your snowmobile in an optimally safe condition.

But you may need to move it around in the garage sometimes.

This occurs when you want to clean your garage in which the snowmobile is stored.

Due to the small space it occupied, you might need to just drag your snowmobile to clean some dirt in the garage.

This is one of the few occasions that lead to dragging of snowmobile.

But when this is done, make sure that you are not dragging the snowmobile over a long distance.

2) When You Want To Load Snowmobile In a Truck

Some of the times the snow field might be far from your house.

Due to this, you have to transport your snowmobile safely there to avoid breaking government rules and regulations.

This is because most cities do not allow snowmobiles to be driven on roads.

Not just the restriction from the government, doing so will cause damage to your snowmobile.

This can be in the form of damaged slides or overheated engine.

To avoid this, you have to transport your snowmobile in a safe way to the snow location you want to drive.

This can be done with the use of a truck to transport the snowmobile.

In the process of loading it on the truck, it may resort to a little dragging of the snowmobile at some point.

3) When a Snowmobile gets bad

When your snowmobile encounters some mechanical faults, you need to put your technical skills to work.

If you do not know how to correct mechanical faults in a snowmobile, you need to hire the services of a snowmobile technician.

This need arises when your snowmobile runs into mechanical problems.

It could happen when you are driving in a place where there is no snowmobile mechanics around.

Due to that, you have to transport it to where it can be repaired.

If it is in a location where the snow is very deep, driving in your car might be bad.

But if there is another snowmobile close to you, your faulty snowmobile can be dragged or towed to where you can load it on a truck.

But before you use another snowmobile to transport it, make sure that the snowmobile has enough capacity to tow your faulty snowmobile.

This will avoid damages to the snowmobile that is towing.

4) When Snowmobile Has No Reverse

Most of the times when you drive your snowmobile, you will want to move backward at times.

This is usually done with the reverse function.

But there are some snowmobiles that might not have the reverse function depending on the model and year of production.

Due to this, it causes the driver of the snowmobile to drag the snowmobile to be able to drive the snowmobile in the desired direction.

How To Drag a Snowmobile Safely

when next someone ask you can you drag a snowmobile, do not be afraid of the question.

Your focus should be on how to do it in the most safe condition available.

Some of these will be discussed below which includes;

1) Drag Over a Small Distance

When you want to drag a snowmobile, make sure that the distance of the drag is a short one.

This will avoid too much pressure on the mechanical parts of the snowmobile.

Due to this, the mechanical parts of the snowmobile is preserved from damage.

This includes the slides as well as other parts like the clutch of the snowmobile.

2) Remove The Belt When You Drag a Snowmobile

Like it has been said already, if you want to drag your snowmobile, it should be across a very short distance.

But most of the times the distance of the drag might be a very long one.

Due to this, dragging the snowmobile across such a long distance will end up damaging some parts of the snowmobile.

To avoid this, you need to remove the belt on the snowmobile.

This will help avoid a forceful movement of some mechanical parts which could lead to damage.

With this, you can drag it well without damage to parts like the clutch.

3) Use a Dolly When You Drag a Snowmobile

One of the best ways you can safely drag a snowmobile is when you make use of a snowmobile dolly.

This makes the dragging process very safe and hitch free.

This is because the snowmobile dolly has a tire that rolls.

This removes the chances of tear and wear from the snowmobile.

This happens due to the dolly bearing the weight of the snowmobile and moving it through the tire it has.

When this is done, it removes the stress that would have been developed in the mechanical system of the snowmobile.

Problems Of Dragging a Snowmobile Wrongly

To drag a snowmobile might not be too bad at times.

What makes it bad is the method you use.

If you use methods like use of a snowmobile dolly, you will help avoid damage from reaching your snowmobile.

But is you drag it along a long distance especially on a rough surface, damages will surely arise in the snowmobile.

Some of these damages include;

1) Damage Of Snowmobile Slides

When you are dragging a snowmobile on a rough surface, this will lead to the development of problems on the slides of the snowmobile.

This is due to the bad nature of the surface the slides get in contact with.

This leads to a lot of wear and tear on the surface of the slides which is not good.

2) Damage Of Snowmobile Clutch

When you drag a snowmobile especially if it is done backward, it will cause a spin of the belt in a backward manner.

This is done through the secondary clutch of the snowmobile.

Due to this, pressure is developed on the belt of the snowmobile.

As a result of the pressure, the primary clutch will develop heat in the process due to the friction between it and the belt.

This is really bad and could extend to the damage of other parts.

It is also one of the reasons a snowmobile loses power when under load.

3) Damage Of Other Snowmobile Mechanical Parts

Most of the problems that is developed in a mechanical part of a snowmobile is not directly caused by the faulty mechanical part.

It  is sometimes caused by other faulty mechanical parts.

For example if you do not repair a track with few damaged spots on the lugs or track, it will extend to the total damage of the track.

The same applied to when you drag a snowmobile.

This will cause damage to some parts.

And if you still keep on doing it in a bad way, the damage will extend to other mechanical parts of the snowmobile.

Conclusion On Can You Drag a Snowmobile

When you are faced with the need to drag your snowmobile, do it the right way.

This could be in situations in which you want to load it in a truck or remove it from a truck.

Sometimes you might need to move it around your garage.

Always make sure that you use good methods to avoid damage to the snowmobile mechanical parts.

This has been explained in this guide like the use of a dolly to move your snowmobile.

Further Reading

How To Protect Bottom Of Kayak

How To Replace The Track Of a Snowmobile

Signs a Snowmobile Accident May Occur

Leave a Comment