You will in one way run into some evinrude etec outboard motor problems while using your evinrude motor.
This does not in any way mean that the etec motor from evinrude is totally bad.
It is just one of those flaws since it is a man made thing and not made to last for ever.
Some of these problems are common in evinrude etec motors.
Some are caused by irresponsible use of the outboard motor.
That is why you have to always make sure that you take proper care of your outboard motor irrespective of the brand.
This will help reduce the frequency of failure from the outboard motor.
In this guide, you will learn of the problems that an evinrude etec outboard motor faces and how to fix them.
Evinrude Etec Problems
1) Etec Motor Vibrating When Accelerating
When you are using a well functioning outboard motor, one of the things you will experience is a stable performance.
This is due to the optimal performance of the outboard motor.
But when the outboard motor is not performing well, the performance will be unstable.
This will result in the outboard motor producing a lot of uneven vibrations when accelerating.
When this occurs, there are a lot of things that might be the cause.
This happens a lot of times in a lot of outboard motors including the evinrude etec model.
What you have to do is to make sure that you run a thorough troubleshooting on what might be the cause.
One of the major reasons why this occurs is when the engine is under performing.
When an engine under performs, it will not be able to match the power demand when accelerating.
This causes the outboard motor to produce a lot of uneven vibrations when it accelerates.
An engine under performs when all the cylinders are not firing well.
This is always as a result of low compression in the cylinders of the engine, bad fuel or a bad spark plug in the engine of the outboard motor.
2) Outboard Motor Not Starting
Have you ever wanted to spend time on the water with your boat but your outboard motor will not start.
It can be a very bad experience as I have experienced it too.
In a lot of the cases, it is usually due to a minor problem.
But in some other cases, it can be caused by a major fault in the outboard motor.
This is more frequent in an evinrude motor that has been unused for a long period of time.
In a case like this, due to the long period of time it has been unused, the fuel inside the engine will be bad.
This will make the outboard motor not to start.
Apart from that, there are other reasons that can make an outboard motor not to start.
it can also be cases like a clogged carburetor or a bad spark plug.
When you discover that the evinrude etec problem that you are facing is the inability of your outboard not starting, you have to make sure that you check the carburetor and spark plug condition very well.
3) Outboard Motor Dies While Accelerating
Your outboard motor dying while accelerating is one of the evinrude etec issues you may face when using your evinrude etec motor.
When this occurs, it is usually due to a bad spark plug or bad fuel.
You should also watch out for the load you impose on your boat.
Make sure that it does not exceed the capacity of the outboard motor.
4) Low Power From The Engine
One of the things you have to pay close attention to is the timely maintenance of your outboard motor.
This includes your evinrude etec outboard motor too.
This is because when it is due for maintenance, there are some signs it will show.
One of the signs will be that it may start smoking or lose efficient power production from the outboard motor.
This is usually caused by a low compression in the engine or other reasons like throttle cable being too loose.
5) Too Much Noise From The Engine
An engine that is too noisy is always very uncomfortable.
When it occurs, then there is something that is not right.
This is one problem that a lot of outboards users always face.
This is always due to loose contact between the exhaust and the engine.
The exhaust system is made to release the waste gas from the outboard engine.
it also helps in reducing the noise produced from the outboard motor engine too.
But for this to be possible, the contact between the exhaust and the engine has to be very tight.
This will help avoid leakage of the rough engine noise.
So when you observe that your evinrude etec engine is very noisy when operating, you have to check if the bolts at the contact point between the exhaust and engine is loose.
6) Rusty Outboard Motor
Another problem with evinrude etec outboard motor is corossion of the outboard motor parts.
The water where an outboard motor is used on plays a vital role in the lifespan of the outboard motor.
if you frequently use your outboard motor on a fresh water, then issues of corossion will be minor.
But if you use your outboard motor on a salty water, then you will face severe corossion issue.
This is one of the problems a lot of outboard motor owners face when they drive on salty waters.
How To Fix Evinrude Etec Problems
1) Etec Motor Vibrating When Accelerating
When you discover that your etec outboard motor is vibrating while accelerating, you have to perform proper troubleshooting.
This will help you discover what is the cause of the vibration.
If it is a bad fuel, make sure that you change the fuel to a good one.
If it is caused by a spark plug, make sure that you change the spark plug to a good one.
This will help your evinrude etec motor move well on the water when you are accelerating.
2) Outboard Motor Not Starting
When you discover that your outboard motor like thye evinrude etec is not starting, you have to perform a troubleshooting.
This cuts across checking the working condition of the plug, condition of the primer bulb as well as the quality of fuel used.
When you discover what the cause is, you have to fix it.
If the fuel, primer bulb or spark plug is bad, then replace it with a good one.
3) Outboard Motor Dies While Accelerating
When you have an evinrude etec problem of outboard motor dying when accelerating, you have to check the condition of the fuel pump.
This is because when the outboard motor is accelerating, it will demand for more fuel to function well.
If the fuel pump is bad, it will not be able to supply the needed volume of fuel to the engine of the outboard motor.
This will result in the outboard motor dying especially when it is accelerating.
Apart from a bad fuel pump, a bad fuel or bad spark plug can cause this too.
That is why you have to make sure that you perform a proper diagnoses to determine what the cause may be.
When you discover what the cause is, then you have to make sure that you provide the solution.
If it is caused by a bad fuel pump, then you have to make sure that you change the fuel pump to a good one.
In changing the fuel pump to a good one, make sure that you are making use of the right capacity that meets the demand of the engine.
Using an improper fuel pump capacity will still lead to issues.
If the spark plugs are bad, then make sure that you replace the bad spark plugs with a good one.
4) Low Power From The Engine
There are several things that can cause low power output from an evinrude etec outboard motor.
An outboard motor that is long due for maintenance can be one of the reasons.
A blocked carburetor or bad fuel pump can also cause this.
A losely held throttle cable can also lead to a low power output from the engine too.
To correct this, you have to match the solution with the problem.
If the low engine power output is due to a loosely held throttle cable, then you have to make sure that you tighten the throttle cable optimally.
If it is caused due to a long overdue maintenence, then you have to make sure that you take your outboard motor for proper maintenance and servicing.
This will eliminate the evinrude etec outboard motor problems and help it to function well.
5) Too Much Noise From The Engine
When you discover that your outboard motor is making too much noise, you have to check the tension of the throttle cable.
If it held too tight, then it will cause the engine to be too loud.
To correct this, you have to make sure that you reduce the tension to an optimal level.
Also make sure that you check the contact between the sxhaust syatem and the engine.
It the contact is loosely held, then the noise from the engine will leak from there.
To correct this, you have to make sure that you tighten the contacts well.
6) Rusty Outboard Motor
Having a rusty outboard motor is a very bad problem.
But this is one of the evinrude etec problems a lot of users face.
In most of the cases, a rusty outboard is usually due to the type of water you ride your boat on.
If you are making use of a fresh water, a rusty outboard will not occur very fast.
But if you are using your outboard motor to power your boat on a salty water, then it will easily rust if you do not wash it well after use.
To solve a rusty outboard issue, you have to make sure that you thoroughly wash the outboard motor with fresh water after use in a salty water.
Conclusion
The evinrude model is built with durability in mind.
But irrespective of that, evinrude etec problems will always show up in one way or the other.
When this occurs, you have to make sure that you solve them with the solutions provided in this guide.
That will help avoid damage extending to other parts of the outboard motor.
This will also help reduce the severity of the evinrude etec outboard motor problems that you encounter.
Further Readings